MAX901BCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX901 |
| Pin Count | 16 |
| Output Type | TTL |
| Power Supplies | 55/10GND/-5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Propagation Delay | 8 ns |
| Quiescent Current | 15mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10μA |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 15mA12mA6mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX901BCSE+ Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with an output type of TTL is being used.Ready for shipping in Tube package.The comparator has a total of 16 terminals.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .A total of 16 pins are included.Surface Mount universial mout for easy adapting.The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator is equipped with 16 pins.Search MAX901 to find more pin-to-pin solutions.There is a quiescent current of 15mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 15mA .The compartator could be damaged if the current supply exceeds 15mA .In order to run the device, there are only 55/10GND/-5V power supplies required.Electronic comparator is possible to input a maximum of 10μA current into the device.
MAX901BCSE+ Features
TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 15mA
MAX901BCSE+ Applications
There are a lot of Maxim Integrated MAX901BCSE+ linear comparators applications.
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Limit Comparators
- Ultra-Low Power Systems
- Building automation
- Industrial
- Point of load regulators
- Wearable Devices
- Automotive
- Factory automation & control
