Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX901 |
Pin Count |
16 |
Output Type |
TTL |
Number of Elements |
4 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
-12mA |
Max Supply Current |
-12mA |
Propagation Delay |
8 ns |
Quiescent Current |
15mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
2mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
10μA |
Input Bias Current |
6μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
15mA12mA6mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX901BCSE+T Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a comparator of type TTL output on this device.The part will be shipped by Tape & Reel (TR) .16 terminals are found on the comparator.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .A total of 4 elements can be found in it.The board includes 16 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.16 pins are present on the comparator.You can find more pin-to-pin solutions by searching MAX901 .As a result, this comparator displays a quiescent current of 15mA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be -12mA in order to use the device normally.A supply current exceeding -12mA may result in the comparator malfunctioning.In order to operate the device, 55/10GND/-5V power supplies are sufficient.Electronic comparator is possible to input up to 10μA current into the device.
MAX901BCSE+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 15mA
MAX901BCSE+T Applications
There are a lot of Maxim Integrated MAX901BCSE+T linear comparators applications.
- Body Control Modules
- DC/DC and AC/DC power supplies
- Battery-Powered Electronics
- Limit Comparators
- Laptop Computers
- High-Speed Sampling Circuits
- Notebooks and PDAs
- Industrial
- Window Comparators
- Automotive