banner_page

MAX901BESE

Surface Mount Tube 8 ns μs Linear Comparators 6μA pA 2005 -12mA μA 4mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX901BESE
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 829
  • Description: Surface Mount Tube 8 ns μs Linear Comparators 6μA pA 2005 -12mA μA 4mV mV Surface Mount (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Max Power Dissipation 500mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number MAX901
Pin Count 16
Output Type TTL
Operating Supply Voltage 9V
Number of Elements 4
Power Supplies 55/10GND/-5V
Nominal Supply Current -12mA
Max Supply Current -12mA
Quiescent Current 15mA
Response Time 8 ns
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 5V~10V ±2.5V~5V
Input Offset Voltage (Vos) 4mV
Neg Supply Voltage-Nom (Vsup) -5V
Average Bias Current-Max (IIB) 15μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 6V
Max Input Current 10μA
Input Bias Current 6μA
Current - Quiescent (Max) 15mA12mA6mA
Voltage - Input Offset (Max) 4mV @ ±5V
Current - Input Bias (Max) 10μA @ ±5V
CMRR, PSRR (Typ) 82.5dB CMRR, 80dB PSRR
Height Seated (Max) 1.75mm
Length 9.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX901BESE Overview


The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a TTL output type for this comparator.The chip is packaged with Tube .There are16 terminals on the comparator.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as General Purpose .This element consists of 4 elements in total.Electronic comparator has 16 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 16 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX901 .There is 15mA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires -12mA supply current.If the current supply exceeds -12mA , the comparator could malfunction.55/10GND/-5V power supplies are enough to run the device.Input current to the device is limited to 10μA .Normal operation requires 9V operating supply voltage.

MAX901BESE Features


TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 15mA

MAX901BESE Applications


There are a lot of Maxim Integrated MAX901BESE linear comparators applications.

  • Point of load regulators
  • Window Comparators, Multivibrators
  • High-Speed Differential Line Receiver
  • Simple Analog-to-Digital Converters (ADCs)
  • Hand-Held Electronics
  • Ultra-Low Power Systems
  • Industrial
  • Wireless Base Stations
  • Multivibrators and High-Voltage Digital Logic Gates
  • Automotive

Write a review

Note: HTML is not translated!
    Bad           Good