Parameters |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
727mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9020 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1.7μA |
Output Current |
50mA |
Max Supply Current |
1.7μA |
Propagation Delay |
31 μs |
Quiescent Current |
2μA |
Response Time |
31000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1nA |
Dual Supply Voltage |
5.5V |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
2μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Height |
1.3mm |
Length |
3mm |
Width |
1.75mm |
MAX9020EKA+T Overview
To facilitate transportation, it comes packaged in SOT-23-8 .The comparator has a type CMOS, Open-Drain, Rail-to-Rail output.As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparators families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .The total number of elements is 2 .The board includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX9020 .There is a quiescent current of 2μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 1.7μA .An excess of current supply over 1.7μA could result in malfunction of the comparator.The device can be powered by 5V power supplies.The maximal current your can input into the device is 1nA .A comparator part from the Beyond-the-Rails? series is used in this part.
MAX9020EKA+T Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2μA
MAX9020EKA+T Applications
There are a lot of Maxim Integrated MAX9020EKA+T linear comparators applications.
- Factory automation & control
- Infotainment & cluster
- Body Control Modules
- Multivibrators and High-Voltage Digital Logic Gates
- Set Top Boxes
- Motor drives
- Current and voltage sensing
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Appliances