MAX9021AUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 247mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9021 |
| Pin Count | 5 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 5μA |
| Max Supply Current | 5μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 5μA |
| Response Time | 8000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3nA |
| Input Bias Current | 3nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9021AUK+T Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .The comparator has a type CMOS, Rail-to-Rail, TTL output.As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.Currently, it consists of only 1 elements.Electronic comparator includes 5 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator has 5 pins.You can find more pin-to-pin solutions by searching MAX9021 .This comparator presents a quiescent current of 5μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 5μA .A current supply greater than 5μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 3nA current into the device.
MAX9021AUK+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9021AUK+T Applications
There are a lot of Maxim Integrated MAX9021AUK+T linear comparators applications.
- Power Supervision
- Alarm and Monitoring Circuits
- Analog front end
- Battery-Powered Electronics
- Power management
- Infotainment & cluster
- Portable and Battery-Powered Systems
- System control and monitoring
- RC Timers
- Wearable Devices
