MAX9021AXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 247mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9021 |
| Pin Count | 5 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 2.8μA |
| Max Supply Current | 2.8μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 5μA |
| Response Time | 8000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3nA |
| Input Bias Current | 3nA |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9021AXK+T Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 for ease of transportation.The comparator has a CMOS, Rail-to-Rail, TTL output.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The chip belongs to Comparators .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.The total number of elements is 1 .The pinout of the component starts from 5 pins it has.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.Electronic comparator has 5 pins.Search MAX9021 to find more pin-to-pin solutions.The comparator presents a quiescent current of 5μA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 2.8μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2.8μA .The maximal current your can input into the device is 3nA .
MAX9021AXK+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9021AXK+T Applications
There are a lot of Maxim Integrated MAX9021AXK+T linear comparators applications.
- Building automation
- High-Speed Differential Line Receiver
- Automotive
- Threshold Detectors
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- System control and monitoring
- Wireless Base Stations
- Ultra-Low Power Systems
- Infotainment and Clusters
