Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9022 |
Pin Count |
8 |
Output Type |
CMOS, Rail-to-Rail, TTL |
Number of Elements |
2 |
Nominal Supply Current |
5.6μA |
Max Supply Current |
5.6μA |
Propagation Delay |
8 μs |
Quiescent Current |
5μA |
Response Time |
8000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V ±1.25V~2.75V |
Input Offset Voltage (Vos) |
1mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
3nA |
Input Bias Current |
3nA |
Current - Quiescent (Max) |
5μA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.003μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
100dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.45mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9022AKA-T Overview
To facilitate transportation, it comes packaged in SOT-23-8 .There is a CMOS, Rail-to-Rail, TTL output type for this comparator.This chip is designed with the Tape & Reel (TR) package.The comparator has a total of 8 terminals.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching MAX9022 .In this comparator, the quiescent current is 5μA .A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 5.6μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 5.6μA .Electronic comparator is possible to input a maximum of 3nA current into the device.
MAX9022AKA-T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9022AKA-T Applications
There are a lot of Maxim Integrated MAX9022AKA-T linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- Battery-Powered Electronics
- Security Detection Systems
- Mobile Phones and Tablets
- Handheld Instruments
- Wireless Base Stations
- Factory automation & control
- Notebooks and PDAs
- Body Control Modules