MAX9022ASA+T
| Parameters | |
|---|---|
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9022 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 5.6μA |
| Max Supply Current | 5.6μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 5μA |
| Response Time | 8000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3nA |
| Input Bias Current | 3nA |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
MAX9022ASA+T Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Rail-to-Rail, TTL output type.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 2 elements in total.The pinout of the component starts from 8 pins it has.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9022 .There is a quiescent current of 5μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 5.6μA for normal use.If the current supply exceeds 5.6μA , the comparator could malfunction.Electronic comparator is possible to input a maximum of 3nA current into the device.
MAX9022ASA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9022ASA+T Applications
There are a lot of Maxim Integrated MAX9022ASA+T linear comparators applications.
- Zero-Crossing Detectors
- Automotive
- Power management
- Building automation
- Power Supervision
- Body Control Modules
- DC/DC and AC/DC power supplies
- RC Timers
- Analog front end
- Self-diagnostics
