MAX9024AUD+T
| Parameters | |
|---|---|
| Base Part Number | MAX9024 |
| Pin Count | 14 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-2.75/2.5/5.5V |
| Nominal Supply Current | 11.2μA |
| Max Supply Current | 11.2μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 5μA |
| Response Time | 8000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 3nA |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
MAX9024AUD+T Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Rail-to-Rail, TTL output on this device.This package has been designed with Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .This element consists of 4 elements in total.As a result, it contains 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .Electronic comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9024 .The comparator presents a quiescent current of 5μA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 11.2μA supply current.A supply current exceeding 11.2μA may result in the comparator malfunctioning.A power supply of +-1.25/+-2.75/2.5/5.5V is sufficient for the operation of the device.
MAX9024AUD+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
MAX9024AUD+T Applications
There are a lot of Maxim Integrated MAX9024AUD+T linear comparators applications.
- Window Comparators, Multivibrators
- System control and monitoring
- Battery-Powered Electronics
- Window Comparators
- Body Control Modules
- Infotainment and Clusters
- High-Speed Differential Line Receiver
- Factory automation & control
- RC Timers
- Zero-Crossing Detectors
