MAX9026EBT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, CSPBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Comparator |
| Max Power Dissipation | 308mW |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9026 |
| Pin Count | 6 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.2μA |
| Output Current | 50mA |
| Max Supply Current | 2.2μA |
| Propagation Delay | 31 μs |
| Quiescent Current | 2.2μA |
| Turn On Delay Time | 7 μs |
| Response Time | 31000 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 50.45dB CMRR, 60dB PSRR |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9026EBT+T Overview
In order to make transportation easier, it is packaged in 6-WFBGA, CSPBGA .Output type of this comparator is Open-Drain, Rail-to-Rail .This device is designed in Tape & Reel (TR) case.The comparator has a total of 6 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.A total of 1 elements can be found in it.The device contains 6 pins.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .6 pins are present on the comparator.In order to find a solution that meets your specific needs, search MAX9026 for more pin-to-pin solutions.A quiescent current of 2.2μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 2.2μA when using the device.The compartator could be damaged if the current supply exceeds 2.2μA .There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input a maximum of 1nA current into the device.The part is based on Beyond-the-Rails? .
MAX9026EBT+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.2μA
MAX9026EBT+T Applications
There are a lot of Maxim Integrated MAX9026EBT+T linear comparators applications.
- General-Purpose Portable Devices
- Mobile Phones
- Alarm and Monitoring Circuits
- Motor drives
- Mobile Phones and Tablets
- Window Comparators, Multivibrators
- Hand-Held Electronics
- Building automation
- DC/DC and AC/DC power supplies
- Portable Battery Monitoring
