Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX902 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
2 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Quiescent Current |
3mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
8mA 6mA 3mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Length |
19.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX902CPD+ Overview
A convenient packaging is provided in the form of 14-DIP (0.300, 7.62mm) .Output type TTL is used for this comparator.This device is designed in Tube case.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as with Latch .There are a total of 2 elements in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 14 pins on the comparator.You may wish to search MAX902 for more solutions that address your specific needs.This comparator presents a quiescent current of 3mA .The PCB or other board has a Through Hole for mounting.Normal operation of the device requires 4mA supply current.A supply current exceeding 4mA may result in the comparator malfunctioning.This device requires 55/10GND/-5V power supplies to operate.
MAX902CPD+ Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 3mA
MAX902CPD+ Applications
There are a lot of Maxim Integrated MAX902CPD+ linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Wearable Devices
- Analog front end
- System control and monitoring
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Limit Comparators
- General Purpose Low Voltage Applications
- Consumer Medical Electronics
- Battery-Powered Electronics