MAX902CSD+
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX902 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 9V |
| Power Supplies | 55/10GND/-5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Quiescent Current | 3mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10μA |
| Dual Supply Voltage | 3V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 8mA 6mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX902CSD+ Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a TTL output is used here.We ship the part through Tube .As you can see, the comparator has14 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical with Latch comparator.The device contains 14 pins.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.14 pins are present on the comparator.Search MAX902 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 3mA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 4mA .If the current supply exceeds 4mA , the comparator could malfunction.A power supply of 55/10GND/-5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum of 10μA current into the device.The operating supply voltage for normal operation should be 9V .
MAX902CSD+ Features
TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 3mA
MAX902CSD+ Applications
There are a lot of Maxim Integrated MAX902CSD+ linear comparators applications.
- Automatic Test Equipment
- Lithium ion battery monitoring
- Security Detection Systems
- Ultra-Low Power Systems
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- Threshold Detectors
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Mobile Communications
