MAX902CSD+T
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX902 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Power Supplies | 55/10GND/-5V |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Quiescent Current | 3mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 8mA 6mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
MAX902CSD+T Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of TTL is being used.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.Electronic comparator is a component of the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type with Latch .There are a total of 2 elements in it.There are 14 pins on this board.The recommended mounting method is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX902 .There is a quiescent current of 3mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current of the device be 4mA .A current supply greater than 4mA may result in the comparator malfunctioning.A power supply of 55/10GND/-5V is sufficient for the operation of the device.Normal operation requires 9V operating supply voltage.
MAX902CSD+T Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 3mA
MAX902CSD+T Applications
There are a lot of Maxim Integrated MAX902CSD+T linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Appliances
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Consumer Medical Electronics
- Handheld Instruments
- Portable Battery Monitoring
- DC/DC and AC/DC power supplies
- Building automation
- Pulse, Squarewave, and Time Delay Generators
