Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX902 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
2 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Quiescent Current |
3mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
10μA |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
8mA 6mA 3mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Length |
19.05mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX902EPD+ Overview
In order to facilitate transportation, it is packaged in 14-DIP (0.300, 7.62mm) .There is a comparator of type TTL output on this device.The part is shipped by Tube .You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Latch .There are a total of 2 elements in it.A total of 14 pins are included.The recommended mounting type is Through Hole .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 14 pins.In order to find a solution that meets your specific needs, search MAX902 for more pin-to-pin solutions.There is a quiescent current of 3mA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 4mA .An excess of current supply over 4mA could result in malfunction of the comparator.The device can be run with 55/10GND/-5V power supplies.You can input a maximum current of 10μA into this device.
MAX902EPD+ Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX902EPD+ Applications
There are a lot of Maxim Integrated MAX902EPD+ linear comparators applications.
- Current and voltage sensing
- Appliances
- Industrial
- Hand-Held Electronics
- Mobile Communications
- Analog front end
- High-Speed Differential Line Receiver
- Lithium ion battery monitoring
- Threshold Detectors
- Motor drives