Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX902 |
Pin Count |
14 |
Output Type |
TTL |
Operating Supply Voltage |
9V |
Number of Elements |
2 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
8mA |
Max Supply Current |
8mA |
Propagation Delay |
8 ns |
Quiescent Current |
3mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
82.5 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
10μA |
Dual Supply Voltage |
3V |
Input Bias Current |
10μA |
Current - Quiescent (Max) |
8mA 6mA 3mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
MAX902ESD+ Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is TTL .This device is designed in Tube case.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator consists of 2 elements in total.As a result, it contains 14 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching MAX902 .There is a quiescent current of 3mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 8mA .An excess of current supply over 8mA could result in malfunction of the comparator.The device can be run with 55/10GND/-5V power supplies.Electronic comparator is possible to input up to 10μA current into the device.For normal operation, the operating supply voltage must be 9V .
MAX902ESD+ Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX902ESD+ Applications
There are a lot of Maxim Integrated MAX902ESD+ linear comparators applications.
- Consumer Medical Electronics
- Building automation
- Infotainment and Clusters
- Lithium ion battery monitoring
- Point of load regulators
- Mobile Communications
- Pulse, Squarewave, and Time Delay Generators
- Threshold Detectors
- Automotive
- Window Comparators