Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX902 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
2 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Propagation Delay |
8 ns |
Quiescent Current |
3mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
15μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
8mA 6mA 3mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX902ESD+T Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with an output type of TTL is being used.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type with Latch .There are a total of 2 elements in it.The device is equipped with 14 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX902 .In this comparator, the quiescent current is 3mA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 4mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 4mA .55/10GND/-5V power supplies are enough to run the device.
MAX902ESD+T Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX902ESD+T Applications
There are a lot of Maxim Integrated MAX902ESD+T linear comparators applications.
- Portable Battery Monitoring
- Battery-Powered Electronics
- Window Comparators
- Limit Comparators
- Pulse, Squarewave, and Time Delay Generators
- System control and monitoring
- Mobile Phones and Tablets
- Industrial
- DC/DC and AC/DC power supplies
- General Purpose Low Voltage Applications