MAX9030AXT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 245mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9030 |
| Pin Count | 6 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 35μA |
| Max Supply Current | 35μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 8nA |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 1mm |
| Length | 2.15mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9030AXT+T Overview
In order to facilitate transportation, it is packaged in 6-TSSOP, SC-88, SOT-363 .There is a CMOS, Rail-to-Rail, TTL output type for this comparator.This device is designed in Tape & Reel (TR) case.The comparator has 6 terminals.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .In total, it contains 1 elements.The board includes 6 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.6 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9030 .There is a quiescent current of 55μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 35μA .Current supply exceeding 35μA could cause disfunction of the compartator.3/5V power supplies are enough to run the device.There is a maximum current that can be input into the device of 8nA .
MAX9030AXT+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9030AXT+T Applications
There are a lot of Maxim Integrated MAX9030AXT+T linear comparators applications.
- Body Control Modules
- Battery management and protection
- Ultra-Low Power Systems
- Threshold Detectors
- High-Speed Sampling Circuits
- Infotainment and Clusters
- Portable Battery Monitoring
- Zero-Crossing Detectors
- Set Top Boxes
- Analog front end
