MAX9031AUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9031 |
| Pin Count | 5 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 55μA |
| Max Supply Current | 55μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Turn On Delay Time | 188 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 8nA |
| Input Bias Current | 8nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9031AUK+T Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.This comparator is of the CMOS, Rail-to-Rail, TTL output type.As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.A total of 5 pins are included.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 5 pins.Search MAX9031 to find more pin-to-pin solutions.There is a quiescent current of 55μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 55μA .A current supply greater than 55μA may result in the comparator malfunctioning.Input current to the device is limited to 8nA .
MAX9031AUK+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9031AUK+T Applications
There are a lot of Maxim Integrated MAX9031AUK+T linear comparators applications.
- Window Comparators, Multivibrators
- Appliances
- Security Detection Systems
- Consumer Medical Electronics
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- System control and monitoring
- Limit Comparators
- Zero-Crossing Detectors
- Portable Battery Monitoring
