MAX9032AKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9032 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 70μA |
| Max Supply Current | 70μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 8nA |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9032AKA+T Overview
A convenient packaging is provided in the form of SOT-23-8 .The comparator has an output type of CMOS, Rail-to-Rail, TTL .Ready for shipping in Tape & Reel (TR) package.There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.There are a total of 2 elements in it.The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 8 pins.Search MAX9032 to find more pin-to-pin solutions.There is a quiescent current of 55μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 70μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 70μA .In order to operate the device, 3/5V power supplies are sufficient.A maximum current of 8nA can be supplied to the device.
MAX9032AKA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9032AKA+T Applications
There are a lot of Maxim Integrated MAX9032AKA+T linear comparators applications.
- Zero-Crossing Detectors
- Notebooks and PDAs
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Window Comparators
- Lithium ion battery monitoring
- Consumer Medical Electronics
- Wearable Devices
- Motor drives
