MAX9032ASA+
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9032 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 55μA |
| Max Supply Current | 55μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 8nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
MAX9032ASA+ Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Rail-to-Rail, TTL output is used here.We ship the part through Tube .There are 8 terminals on the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.Electronic comparator includes 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.8 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9032 .A quiescent current of 55μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 55μA .If the current supply exceeds 55μA , the comparator might be damaged.There is sufficient power to run the device from 3/5V power supplies.
MAX9032ASA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9032ASA+ Applications
There are a lot of Maxim Integrated MAX9032ASA+ linear comparators applications.
- Zero-Crossing Detectors
- Metering Systems
- Portable Battery Monitoring
- Infotainment & cluster
- Window Comparators
- Ultra-Low Power Systems
- Appliances
- Battery management and protection
- Zero-Crossing Detectors
- Motor drives
