MAX9032AUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9032 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 70μA |
| Max Supply Current | 70μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9032AUA+T Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Rail-to-Rail, TTL output type.This chip is designed with the Tape & Reel (TR) package.There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.The device contains 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX9032 .In this comparator, the quiescent current is 55μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 70μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 70μA .In order to run the device, there are only 3/5V power supplies required.
MAX9032AUA+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9032AUA+T Applications
There are a lot of Maxim Integrated MAX9032AUA+T linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Body Control Modules
- Mobile Phones
- Wireless Base Stations
- Limit Comparators
- Appliances
- Power management
- Hand-Held Electronics
- Wide Range VCO; MOS Clock Timers
- Ultra-Low Power Systems
