MAX9034ASD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9034 |
| Pin Count | 14 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 140μA |
| Max Supply Current | 140μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9034ASD+T Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Rail-to-Rail, TTL output type.This device is designed in Tape & Reel (TR) case.There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .The total number of elements is 4 .The device is equipped with 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.In order to find a solution that meets your specific needs, search MAX9034 for more pin-to-pin solutions.This comparator presents a quiescent current of 55μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 140μA supply current.The compartator could be damaged if the current supply exceeds 140μA .There is sufficient power to run the device from 3/5V power supplies.
MAX9034ASD+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9034ASD+T Applications
There are a lot of Maxim Integrated MAX9034ASD+T linear comparators applications.
- Window Comparators
- Automatic Test Equipment
- Window Comparators
- Power Supervision
- Body Control Modules
- Mobile Phones and Tablets
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Automotive
