Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
28mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MAX903 |
Pin Count |
8 |
Output Type |
TTL |
Number of Circuits |
1 |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Quiescent Current |
1.5mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
4mA 3mA 1.5mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Height Seated (Max) |
4.572mm |
Length |
9.375mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX903CPA+ Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .Output type TTL is used for this comparator.The chip is packaged with Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical with Latch comparator.The device contains 8 pins.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MAX903 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1.5mA is displayed by this comparator.There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 4mA .A supply current exceeding 4mA may result in the comparator malfunctioning.
MAX903CPA+ Features
TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 1.5mA
MAX903CPA+ Applications
There are a lot of Maxim Integrated MAX903CPA+ linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones
- Motor drives
- System control and monitoring
- Limit Comparators
- Portable Battery Monitoring
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Body Control Modules
- Analog front end