Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
28mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MAX903 |
Pin Count |
8 |
Output Type |
TTL |
Number of Elements |
1 |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Quiescent Current |
1.5mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
10μA |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
4mA 3mA 1.5mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Height Seated (Max) |
4.572mm |
Length |
9.375mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX903EPA+ Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has a type TTL output.The chip is packaged with Tube .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.In terms of type, this is a typical with Latch comparator.Electronic comparator consists of 1 elements in total.The pinout of the component starts from 8 pins it has.Through Hole universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX903 .There is a quiescent current of 1.5mA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 4mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 4mA .There is a maximum current that can be input into the device of 10μA .
MAX903EPA+ Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.5mA
MAX903EPA+ Applications
There are a lot of Maxim Integrated MAX903EPA+ linear comparators applications.
- Automotive
- Hand-Held Electronics
- Body Control Modules
- Current and voltage sensing
- Battery management and protection
- High-Speed Differential Line Receiver
- Set Top Boxes
- Battery-Powered Electronics
- Power Supervision
- Lithium ion battery monitoring