MAX903ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX903 |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 9V |
| Number of Circuits | 1 |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Propagation Delay | 8 ns |
| Quiescent Current | 1.5mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10μA |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 4mA 3mA 1.5mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX903ESA+ Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a TTL output.Electronic comparator is shipped by Tube .8 terminals are found on the comparator.The component belongs to the Comparators family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as with Latch .The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX903 .As a result, this comparator displays a quiescent current of 1.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 4mA .An excess of current supply over 4mA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 10μA current into the device.Normal operation requires 9V operating supply voltage.
MAX903ESA+ Features
TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 1.5mA
MAX903ESA+ Applications
There are a lot of Maxim Integrated MAX903ESA+ linear comparators applications.
- High-Speed Differential Line Receiver
- Automotive
- Point of load regulators
- Self-diagnostics
- Window Comparators
- Appliances
- Alarm and Monitoring Circuits
- Notebooks and PDAs
- Threshold Detectors
- Portable and Battery-Powered Systems
