Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
28mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX903 |
Pin Count |
8 |
Output Type |
TTL |
Number of Elements |
1 |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Propagation Delay |
8 ns |
Quiescent Current |
1.5mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
10μA |
Input Bias Current |
10μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
4mA 3mA 1.5mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
10μA @ ±5V |
CMRR, PSRR (Typ) |
82.5dB CMRR, 80dB PSRR |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX903ESA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a TTL output is used here.This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical with Latch .In total, it contains 1 elements.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator consists of 8 pins.You can search MAX903 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 1.5mA volts.Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 4mA for normal use.If the current supply exceeds 4mA , the comparator could malfunction.Input current to the device is limited to 10μA .
MAX903ESA+T Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.5mA
MAX903ESA+T Applications
There are a lot of Maxim Integrated MAX903ESA+T linear comparators applications.
- Battery-Powered Electronics
- Battery management and protection
- Automotive
- Appliances
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Portable Battery Monitoring
- Industrial
- Zero-Crossing Detectors
- Mobile Communications