MAX9041AESA+
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9041 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5/5.5V |
| Nominal Supply Current | 40μA |
| Output Current | 8mA |
| Max Supply Current | 40μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 72μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 72μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX9041AESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.This device is designed in Tube case.The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical with Voltage Reference comparator.The total number of elements is 1 .The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching MAX9041 .The comparator displays a quiescent current of 72μA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 40μA .An excess of current supply over 40μA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 2.5/5.5V power supplies.
MAX9041AESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 72μA
MAX9041AESA+ Applications
There are a lot of Maxim Integrated MAX9041AESA+ linear comparators applications.
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- Metering Systems
- DC/DC and AC/DC power supplies
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Security Detection Systems
- General-Purpose Portable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose, Low-Voltage Applications
