MAX9041AESA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9041 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5/5.5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 72μA |
| Supply Current-Max | 0.072mA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9041AESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .The part will be shipped by Tape & Reel (TR) .The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In general, the chip type can be classified as with Voltage Reference .There are a total of 1 elements in it.The device is equipped with 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.You can search MAX9041 if you are looking for more pin-to-pin solutions.A quiescent current of 72μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.A power supply of 2.5/5.5V is sufficient for the operation of the device.The part can be supplied with a minimum current of 0.072mA .
MAX9041AESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 72μA
MAX9041AESA+T Applications
There are a lot of Maxim Integrated MAX9041AESA+T linear comparators applications.
- DC/DC and AC/DC power supplies
- Building automation
- Window Comparators
- Zero-Crossing Detectors
- Battery-Powered Electronics
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Battery management and protection
- General Purpose Low Voltage Applications
- Current and voltage sensing
