MAX9041BESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9041 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5/5.5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 100μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9041BESA+ Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tube package.As you can see, the comparator has8 terminals.Other Comparator like the device play a important role in the industry.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as with Voltage Reference .Currently, it consists of only 1 elements.A total of 8 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX9041 .As a result, this comparator displays a quiescent current of 100μA .A Surface Mount is provided for mounting it onto a PCB or another board.2.5/5.5V power supplies are enough to run the device.
MAX9041BESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
MAX9041BESA+ Applications
There are a lot of Maxim Integrated MAX9041BESA+ linear comparators applications.
- Point of load regulators
- Threshold Detectors
- Factory automation & control
- Automatic Test Equipment
- Limit Comparators
- Battery management and protection
- Industrial
- Pulse, Squarewave, and Time Delay Generators
- Motor drives
- Ultra-Low Power Systems
