MAX9041BEUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX9041 |
| Pin Count | 6 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 100μA |
| Response Time | 450 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9041BEUT+T Overview
The product is packaged in SOT-23-6 in order to facilitate transportation.A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 6 terminals of the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical with Voltage Reference comparator.Currently, it consists of only 1 elements.The device is equipped with 6 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.6 pins are present on the comparator.You can search MAX9041 if you are looking for more pin-to-pin solutions.A quiescent current of 100μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.In order to operate the device, 3/5V power supplies are sufficient.
MAX9041BEUT+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
MAX9041BEUT+T Applications
There are a lot of Maxim Integrated MAX9041BEUT+T linear comparators applications.
- Metering Systems
- Building automation
- Notebooks and PDAs
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Alarm and Monitoring Circuits
- Mobile Phones and Tablets
- Mobile Communications
- Multivibrators and High-Voltage Digital Logic Gates
- Portable Battery Monitoring
