Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
330mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9042 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
85μA |
Output Current |
8mA |
Max Supply Current |
85μA |
Propagation Delay |
450 ns |
Quiescent Current |
85μA |
Response Time |
400 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.01μA |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1pA |
Input Bias Current |
10nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
1pA @ 5V |
Hysteresis |
±3mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Propagation Delay (Max) |
450ns |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9042AEUA+ Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.This device is designed in Tube case.The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type with Voltage Reference .A total of 2 elements can be found in it.The pinout of the component starts from 8 pins it has.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .You can search MAX9042 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 85μA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 85μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 85μA .A power supply of 3/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 1pA into the device.
MAX9042AEUA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9042AEUA+ Applications
There are a lot of Maxim Integrated MAX9042AEUA+ linear comparators applications.
- Power Supervision
- Body Control Modules
- Portable Battery Monitoring
- Battery-Powered Electronics
- Power management
- General-Purpose Portable Devices
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates