MAX9042BESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9042 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 80μA |
| Output Current | 8mA |
| Max Supply Current | 80μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 130μA |
| Turn On Delay Time | 400 ns |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9042BESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.We ship the part through Tube .The device is designed with 8 terminations.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .The total number of elements is 2 .Electronic comparator has 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for MAX9042 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 130μA volts.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 80μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 80μA .In order to run the device, there are only 3/5V power supplies required.
MAX9042BESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9042BESA+ Applications
There are a lot of Maxim Integrated MAX9042BESA+ linear comparators applications.
- DC/DC and AC/DC power supplies
- System control and monitoring
- Automatic Test Equipment
- Portable and Battery-Powered Systems
- Battery management and protection
- Wireless Base Stations
- Notebooks and PDAs
- Multivibrators and High-Voltage Digital Logic Gates
- Motor drives
- Factory automation & control
