MAX9042BEUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9042 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 130μA |
| Supply Current-Max | 0.13mA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9042BEUA+T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as with Voltage Reference .Electronic comparator consists of 2 elements in total.A total of 8 pins are included.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator is equipped with 8 pins.Try search MAX9042 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 130μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.In order to run the device, there are only 3/5V power supplies required.With this part, a minimum current of 0.13mA can be supplied.
MAX9042BEUA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9042BEUA+T Applications
There are a lot of Maxim Integrated MAX9042BEUA+T linear comparators applications.
- Automotive
- Portable and Battery-Powered Systems
- Mobile Communications
- Analog front end
- Alarm and Monitoring Circuits
- General Purpose Low Voltage Applications
- Ultra-Low Power Systems
- Body Control Modules
- Hand-Held Electronics
- Laptop Computers
