Parameters |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
3/5V |
Number of Channels |
1 |
Nominal Supply Current |
40μA |
Output Current |
8mA |
Max Supply Current |
40μA |
Propagation Delay |
450 ns |
Quiescent Current |
85μA |
Response Time |
400 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
1pA @ 5V |
Hysteresis |
±3mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Propagation Delay (Max) |
450ns |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2015 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
444mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
MAX9043 |
Pin Count |
10 |
MAX9043AEUB+ Overview
To facilitate transportation, it comes packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tube package.The device is designed with 10 terminations.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as with Voltage Reference .The total number of elements is 2 .There are 10 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 10 pins.Search MAX9043 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 85μA .The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 40μA for normal use.If the current supply exceeds 40μA , the comparator might be damaged.In order to run the device, there are only 3/5V power supplies required.To ensure a high level of output quality, 1 channels work together.
MAX9043AEUB+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9043AEUB+ Applications
There are a lot of Maxim Integrated MAX9043AEUB+ linear comparators applications.
- Zero-Crossing Detectors
- Ultra-Low Power Systems
- High-Speed Differential Line Receiver
- Window Comparators
- Battery management and protection
- Power management
- Limit Comparators
- Simple Analog-to-Digital Converters (ADCs)
- Building automation
- Self-diagnostics