MAX9043AEUB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9043 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Supply Current-Max | 0.085mA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 85μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX9043AEUB Overview
In order to facilitate transportation, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.This device is designed in Tube case.The comparator has 10 terminals.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type with Voltage Reference .The total number of elements is 2 .A total of 10 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Alternatively, you may search for MAX9043 to find more pin-to-pin solutions for your specific needs.With a minimum current of 0.085mA , this part can be supplied.
MAX9043AEUB Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9043AEUB Applications
There are a lot of Maxim Integrated MAX9043AEUB linear comparators applications.
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Threshold Detectors
- Mobile Phones and Tablets
- Window Comparators
- DC/DC and AC/DC power supplies
- Point of load regulators
- Limit Comparators
- Laptop Computers
- Alarm and Monitoring Circuits
