MAX9043AEUB-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | TIN LEAD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9043 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Supply Current-Max | 0.085mA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 85μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX9043AEUB-T Overview
To facilitate transportation, it comes packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail, TTL .The part will be shipped by Tape & Reel (TR) .The device is designed with 10 terminations.The chip belongs to Comparator .Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.This element consists of 2 elements in total.There are 10 pins on this board.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.You can find more pin-to-pin solutions by searching MAX9043 .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.A minimum current of 0.085mA can be supplied to this part.
MAX9043AEUB-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9043AEUB-T Applications
There are a lot of Maxim Integrated MAX9043AEUB-T linear comparators applications.
- Building automation
- Alarm and Monitoring Circuits
- DC/DC and AC/DC power supplies
- Window Comparators
- Portable and Battery-Powered Systems
- Handheld Instruments
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Portable Battery Monitoring
- Infotainment and Clusters
