MAX9043AEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9043 |
| Pin Count | 10 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 85μA |
| Supply Current-Max | 0.085mA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9043AEUB+T Overview
The product is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The chip is packaged with Tape & Reel (TR) .As you can see, the comparator has10 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In general, the chip type can be classified as with Voltage Reference .There are a total of 2 elements in it.The device contains 10 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .10 pins are present on the comparator.You may wish to search MAX9043 for more solutions that address your specific needs.A quiescent current of 85μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.A power supply of 3/5V is sufficient for the operation of the device.This part can be supplied with a maimum current of 0.085mA .
MAX9043AEUB+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9043AEUB+T Applications
There are a lot of Maxim Integrated MAX9043AEUB+T linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Ultra-Low Power Systems
- Power Supervision
- Industrial
- RC Timers
- Notebooks and PDAs
- Self-diagnostics
- Wireless Base Stations
- Current and voltage sensing
- Zero-Crossing Detectors
