Parameters |
Terminal Pitch |
0.5mm |
Base Part Number |
MAX9043 |
Pin Count |
10 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
40μA |
Output Current |
8mA |
Max Supply Current |
40μA |
Propagation Delay |
450 ns |
Quiescent Current |
130μA |
Response Time |
400 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Input Offset Voltage (Vos) |
1mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
130μA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
1pA @ 5V |
Hysteresis |
±3mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2015 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
444mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
MAX9043BEUB+ Overview
The product is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The part is shipped by Tube .There are 10 terminals on the comparator.Electronic comparator is a component of the Comparators family.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical with Voltage Reference comparator.This is a 2 element comparator.Electronic comparator has 10 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator has 10 pins.Search MAX9043 to find more pin-to-pin solutions.This comparator presents a quiescent current of 130μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 40μA in order to use the device normally.A current supply greater than 40μA may cause the comparator to malfunction.3/5V power supplies are enough to run the device.You can input a maximum current of 1pA into this device.
MAX9043BEUB+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9043BEUB+ Applications
There are a lot of Maxim Integrated MAX9043BEUB+ linear comparators applications.
- Zero-Crossing Detectors
- System control and monitoring
- Security Detection Systems
- Building automation
- Analog front end
- RC Timers
- Portable and Battery-Powered Systems
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- Window Comparators