MAX9050BEUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9050 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 52μA |
| Output Current | 8mA |
| Max Supply Current | 52μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 100μA |
| Response Time | 450 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9050BEUK+T Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail, TTL .Electronic comparator is shipped by Tape & Reel (TR) .5 terminals are found on the comparator.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.The device contains 5 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX9050 .There is 100μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 52μA .A current supply greater than 52μA may cause the comparator to malfunction.The maximal current your can input into the device is 1pA .
MAX9050BEUK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
MAX9050BEUK+T Applications
There are a lot of Maxim Integrated MAX9050BEUK+T linear comparators applications.
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- Current and voltage sensing
- Motor drives
- General-Purpose, Low-Voltage Applications
- Alarm and Monitoring Circuits
- General-Purpose Portable Devices
- Metering Systems
- Consumer Medical Electronics
- Portable and Battery-Powered Systems
