MAX9051AESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9051 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.7/5.5V |
| Nominal Supply Current | 100μA |
| Output Current | 8mA |
| Max Supply Current | 100μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 72μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 10nA |
| Current - Quiescent (Max) | 72μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9051AESA+ Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.The part will be shipped by Tube .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type with Voltage Reference .In total, it contains 1 elements.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 8 pins.If you require more pin-to-pin solutions, search MAX9051 for more options.A quiescent current of 72μA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 100μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 100μA .2.7/5.5V power supplies are enough to run the device.Electronic comparator is possible to input up to 1pA current into the device.
MAX9051AESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 72μA
MAX9051AESA+ Applications
There are a lot of Maxim Integrated MAX9051AESA+ linear comparators applications.
- High-Speed Sampling Circuits
- Power Supervision
- Wireless Base Stations
- Portable Battery Monitoring
- Battery management and protection
- Lithium ion battery monitoring
- Point of load regulators
- Appliances
- Threshold Detectors
- Window Comparators
