MAX9051AESA+T
| Parameters | |
|---|---|
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9051 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.7/5.5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 72μA |
| Supply Current-Max | 0.072mA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 6V |
MAX9051AESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type with Voltage Reference .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .You can find more pin-to-pin solutions for your special requirements by searching MAX9051 .This comparator presents a quiescent current of 72μA .The PCB or other board can be mounted using the Surface Mount on it.A power supply of 2.7/5.5V is sufficient for the operation of the device.The part can be powered at a minimum current of 0.072mA .
MAX9051AESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 72μA
MAX9051AESA+T Applications
There are a lot of Maxim Integrated MAX9051AESA+T linear comparators applications.
- Building automation
- Automatic Test Equipment
- Portable Battery Monitoring
- System control and monitoring
- Handheld Instruments
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- Hand-Held Electronics
- Appliances
