MAX9052AESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9052 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 40μA |
| Output Current | 8mA |
| Max Supply Current | 40μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 85μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9052AESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.As a result, it is designed with Tube package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Voltage Reference comparator.Currently, it consists of only 2 elements.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search MAX9052 for more pin-to-pin solutions.The comparator displays a quiescent current of 85μA .A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 40μA when using the device.The compartator could be damaged if the current supply exceeds 40μA .In order to run the device, there are only 3/5V power supplies required.You can input a maximum current of 1pA into this device.
MAX9052AESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9052AESA+ Applications
There are a lot of Maxim Integrated MAX9052AESA+ linear comparators applications.
- Battery-Powered Electronics
- Handheld Instruments
- Infotainment and Clusters
- Window Comparators, Multivibrators
- Simple Analog-to-Digital Converters (ADCs)
- Wearable Devices
- Zero-Crossing Detectors
- Infotainment & cluster
- Window Comparators
- Self-diagnostics
