MAX9052BEUA-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9052 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 130μA |
| Supply Current-Max | 0.13mA |
| Response Time | 450 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX9052BEUA-T Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.In total, it contains 2 elements.The device contains 8 pins.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9052 .A quiescent current of 130μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.In order to run the device, there are only 3/5V power supplies required.Electronic comparator is possible to input a maximum of 1pA current into the device.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.13mA .
MAX9052BEUA-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9052BEUA-T Applications
There are a lot of Maxim Integrated MAX9052BEUA-T linear comparators applications.
- Battery management and protection
- Security Detection Systems
- Automatic Test Equipment
- Threshold Detectors
- DC/DC and AC/DC power supplies
- Current and voltage sensing
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Body Control Modules
