MAX9052BEUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | TIN |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9052 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Supply Current-Max | 0.13mA |
| Response Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9052BEUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .Electronic comparator consists of 2 elements in total.The device contains 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.If you require more pin-to-pin solutions, search MAX9052 for more options.The device can be run with 3/5V power supplies.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.13mA .
MAX9052BEUA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9052BEUA+T Applications
There are a lot of Maxim Integrated MAX9052BEUA+T linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- DC/DC and AC/DC power supplies
- Wearable Devices
- General-Purpose, Low-Voltage Applications
- Automatic Test Equipment
- Body Control Modules
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Industrial
- Hand-Held Electronics
