MAX9053AEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 444mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 60μA |
| Output Current | 8mA |
| Max Supply Current | 60μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 85μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 85μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9053AEUB+ Overview
A convenient transport package is provided in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.This package has been designed with Tube .The device is designed with 10 terminations.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type with Voltage Reference .This is a 2 element comparator.Electronic comparator has 10 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.10 pins are available on the comparator.You may wish to search MAX9053 for more solutions that address your specific needs.A quiescent current of 85μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 60μA .The compartator could be damaged if the current supply exceeds 60μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Electronic comparator is possible to input a maximum current of 1pA into the device.
MAX9053AEUB+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9053AEUB+ Applications
There are a lot of Maxim Integrated MAX9053AEUB+ linear comparators applications.
- Hand-Held Electronics
- Building automation
- Zero-Crossing Detectors
- Industrial
- Power management
- Threshold Detectors
- Security Detection Systems
- Zero-Crossing Detectors
- Wireless Base Stations
- Window Comparators, Multivibrators
