MAX9053AEUB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Supply Current-Max | 0.085mA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 85μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX9053AEUB Overview
A convenient packaging is provided in the form of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The chip is packaged with Tube .The device is designed with 10 terminations.The electrical component in this case belongs to the Comparator families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Voltage Reference .Electronic comparator has a total of 2 elements.The pinout of the component starts from 10 pins it has.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .You can search MAX9053 if you are looking for more pin-to-pin solutions.The maximum current that can be supplied to this part is 0.085mA .
MAX9053AEUB Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9053AEUB Applications
There are a lot of Maxim Integrated MAX9053AEUB linear comparators applications.
- Hand-Held Electronics
- Mobile Communications
- Alarm and Monitoring Circuits
- Factory automation & control
- Consumer Medical Electronics
- General-Purpose Portable Devices
- Building automation
- Body Control Modules
- Zero-Crossing Detectors
- Handheld Instruments
