MAX9053AEUB+T
| Parameters | |
|---|---|
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 444mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 60μA |
| Output Current | 8mA |
| Max Supply Current | 60μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 85μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
MAX9053AEUB+T Overview
A convenient transport package is provided in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.This chip is designed with the Tape & Reel (TR) package.The comparator has 10 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type with Voltage Reference .The total number of elements is 2 .Electronic comparator includes 10 pins.The recommended mounting type is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 10 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX9053 .There is a quiescent current of 85μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 60μA for normal use.If the current supply exceeds 60μA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.You can input a maximum current of 1pA into this device.
MAX9053AEUB+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 85μA
MAX9053AEUB+T Applications
There are a lot of Maxim Integrated MAX9053AEUB+T linear comparators applications.
- Power management
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Infotainment & cluster
- Battery-Powered Electronics
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- Metering Systems
- Wearable Devices
