MAX9053BEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 444mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 60μA |
| Output Current | 8mA |
| Max Supply Current | 60μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 130μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9053BEUB+ Overview
The product is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.Ready for shipping in Tube package.The comparator has a total of 10 terminals.The electrical component in this case belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical with Voltage Reference comparator.This is a 2 element comparator.The device includes 10 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 10 pins.You can search MAX9053 if you are looking for more pin-to-pin solutions.There is a quiescent current of 130μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 60μA when using the device.The compartator could be damaged if the current supply exceeds 60μA .The device can be powered by 3/5V power supplies.You are allowed to input a maximum current of 1pA into the device.
MAX9053BEUB+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9053BEUB+ Applications
There are a lot of Maxim Integrated MAX9053BEUB+ linear comparators applications.
- Zero-Crossing Detectors
- Metering Systems
- Ultra-Low Power Systems
- General-Purpose Portable Devices
- Mobile Phones and Tablets
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
