MAX9053BEUB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Supply Current-Max | 0.13mA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX9053BEUB Overview
A convenient packaging is provided in the form of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail, TTL .This chip is designed with the Tube package.Electronic comparator is possible to find the 10 terminals of the comparator.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical with Voltage Reference comparator.There are a total of 2 elements in it.Electronic comparator has 10 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.You can search MAX9053 if you are looking for more pin-to-pin solutions.The part can be powered at a minimum current of 0.13mA .
MAX9053BEUB Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9053BEUB Applications
There are a lot of Maxim Integrated MAX9053BEUB linear comparators applications.
- Power Supervision
- Point of load regulators
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Metering Systems
- Analog front end
- Zero-Crossing Detectors
- Wireless Base Stations
- Building automation
- Body Control Modules
