MAX9053BEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 444mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 60μA |
| Output Current | 8mA |
| Max Supply Current | 60μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 130μA |
| Response Time | 400 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9053BEUB+T Overview
In order to make transportation easier, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.The part will be shipped by Tape & Reel (TR) .The comparator has 10 terminals.Electronic comparator is a part of Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.Currently, it consists of only 2 elements.Electronic comparator includes 10 pins.The type of mounting recommended is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.Electronic comparator has 10 pins.Search MAX9053 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 130μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 60μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 60μA .The device can be powered by 3/5V power supplies.There is a maximum current that can be input into the device of 1pA .
MAX9053BEUB+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 130μA
MAX9053BEUB+T Applications
There are a lot of Maxim Integrated MAX9053BEUB+T linear comparators applications.
- Power management
- Wide Range VCO; MOS Clock Timers
- Portable Battery Monitoring
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Simple Analog-to-Digital Converters (ADCs)
- Pulse, Squarewave, and Time Delay Generators
- Appliances
- Window Comparators
- Battery management and protection
